Opening the Stroller
Auto folding latch
Holding the |
|
|
handle from | Snap |
|
underneath will | Lift up | |
make it easier. | away | |
|
|
2. Grip the handle on each side | 3. Lift up the handle and snap the |
and turn outward to open fully. | stroller away from you. |
Attaching the Rear Wheels
Note:
Attach the rear wheel assemblies to each stroller leg with the wheel spacer facing inward.
1.Stand behind the stroller.
2.Locate the small opening on each rear wheel assembly.
3.Locate the small silver pin on each rear stroller leg.
4.Insert the leg into the wheel assem- bly until the small silver pin locks into the opening.
Attaching & Removing the Front Swivel Wheels
Place front swivel wheel assembly on the swivel shaft. The assembly is secure when it locks onto the shaft.
Removing the Swivel Wheels
Press in the square button located at the bottom of the wheel holder while pulling the assembly off of the swivel shaft.
Release Button
Attaching the Canopy
- 3 -
CAUTION
Failure to fully secure the canopy holders can cause the holders to bend. When storing the stroller by laying it down, be sure the canopy is off the ground to prevent it from bending.
Attaching the Canopy
1.Confirm the canopy is facing in the proper direction.
2.Fully insert the canopy holder (male) to the canopy holder (female) until a click is heard.
3.Fasten the canopy velcro on both sides around the handles to the seat back velcro (2 places.)
Removing the Canopy
Pull the velcro apart and squeeze the bottom of the canopy holder (male). Lift the canopy until it releases from the female holder.
COMBI International Corporation •
