Note: Auto Setup uses
Once you have executed Auto Setup for a particular mode, the monitor will store the new values in its permanent memory.
To execute Auto Setup using the Direct Key function:
1.Make sure the OSD Main Menu is not displayed onscreen. Press the Down ( ▼ ) button to open
the AUTO SETUP ( ) submenu and start running Auto Setup.
2. After Auto Setup has finished, you should have a stable and clear image.
Adjusting Brightness Using the Direct Key
To adjust brightness directly:
1.Make sure the OSD Main Menu is not displayed onscreen. Press the Up ( ▲ ) button to open
the BRIGHTNESS ( ) submenu.
2.Press the Up ( ▲ ) or Down ( ▼ ) buttons to increase or decrease the brightness setting.
3. Press the Select ( ) button to close and exit the BRIGHTNESS menu.
21