2-10 Compaq 2000 Series UPS Operation and Reference Guide

Placing the UPS in Operate mode
Press and hold the ON button ( ) until the LED 16 ( , ON LED) turns green,
indicating that power is available at the UPS output receptacles. The UPS will
acknowledge compliance with a short beep.
2
3
1
Figure 2-6. Operate mode controls
ON LED
ON button
STANDBY button

The Installation is Now Complete

■ For information on operating the UPS, see Chapter 3, “Operation.”
■ For information on changing the configurati on of the UPS, see
Chapter 4, “Configuration.”
■ Use the Compaq website as an additional information source:
http://www.compaq.com