Adjusting Picture Quality

Allow the monitor to warm up for 30 minutes before performing the following procedures. The picture image stabilizes after a warm-up period.

Optimizing Contrast

For best results, set your screen to a dark background (such as the DOS prompt) before adjusting the following settings:

1.Set the brightness and contrast controls to their lowest settings.

2.Increase brightness until the background portions of the screen are visible, then slowly reduce brightness until the background is just extinguished.

3.Adjust contrast control to your preference.

Optimizing Focus

The default image size is preset at the factory. The Size and Position controls in the on-screen display can be used to increase the screen size beyond the default setting. However, expanding the screen image beyond the default settings may degrade the focus at the outer edge of the screen.

To enhance focus, use the lowest brightness level that gives satisfactory results in your viewing environment.

✎Settings that maximize contrast may not offer optimum focus, and settings that maximize focus may not offer optimum contrast.

1-8English