User Modes
The video controller signal may occasionally call for a mode that is not preset if:
■You are not using a compatible Compaq video adapter.
■You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. User changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then automatically recognizes the new mode just as it does a preset mode. In addition to the 12 preset/preload modes that can be changed and stored, there are five user modes that can be entered and stored. When the five user mode settings are exceeded, the newest setting will replace the setting closest to its own setting. When “Factory Reset” is selected from the OSD menu, the factory preset values will replace the saved user settings in operation at the time.
To revert back to the factory default settings, select Reset from the Factory Reset menu in the on-screen display, and the factory default resolutions will replace the user changes made for the operating original display mode.