Computer Setup in Linux
Starting Computer Setup
Computer Setup is a preinstalled,
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer.
NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate and make selections.
NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB legacy support is enabled.
To start Computer Setup, follow these steps:
1.Turn on or restart the computer.
2.Before your operating system opens and while the “F10=ROM Based Setup” message is displayed in the
Using Computer Setup
Navigating and selecting in Computer Setup
The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and System Configuration menus.
1.Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the
Because Computer Setup is not operating system based, it does not support the TouchPad. Navigation and selection are by keystroke:
●To choose a menu or a menu item, use the arrow keys.
●To select an item, press enter.
●To close open dialog boxes and return to the main Computer Setup screen, press esc.
●To view navigation information, press f1.
●To change the language, press f2.
2.Select the File, Security, Diagnostics, or System Configuration menu.
3.To exit Computer Setup, choose one of the following methods:
●To exit Computer Setup without saving your preferences, use the arrow keys to select File > Ignore Changes And Exit. Then follow the instructions on the screen.
●To save your preferences and exit Computer Setup, use the arrow keys to select File > Save Changes And Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
90 Chapter 5 Setup Utility
