Display assembly
Description | Spare part number |
|
|
35.6 cm | |
webcam; Presario, matte black |
|
|
|
35.6 cm | |
webcam; Presario, biscotti |
|
|
|
35.6 cm | |
webcam; HP, biscotti |
|
|
|
35.6 cm | |
webcam; HP, silver |
|
|
|
35.6 cm | |
webcam; HP, white (for model 1.0 only) |
|
|
|
35.6 cm | |
webcam; HP, charcoal (for model 1.1 only) |
|
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 43).
5.Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 49).
6.Remove the following components:
a.Keyboard (see Keyboard on page 53)
b.Optical drive (see Optical drive on page 47)
c.Top cover (see Top cover on page 55)
Remove the display assembly:
1.Turn the computer
2.Open the display as far as possible.
3.Remove the wireless antenna cables (1) from the hole and clips built into the base enclosure.
4.Disconnect the display panel cable (2) from the system board.
5.Disconnect the microphone cable (3) from the system board.
66 Chapter 4 Removal and replacement procedures
