QuickSpecs
Compaq ProLiant DL580
Standard Features
Intel ligen t Manag eab ili ty | Compaq Remote Insight Lights Out Edition support |
| Automatic Server |
| Compaq Insight Manager |
| Compaq Insight Manager XE |
| Integrated Remote |
| Integrated Management Log (IML) |
| Server Health logging |
| |
| Dynamic sector repairing and drive parameter tracking (with Smart Array controllers) |
| Redundant/adaptive load balancing NIC Support |
|
|
Avai lab ili ty | PCI Hot Plug with push button functionality |
| 7 x 24 cooling provided by 8 Hot Plug Redundant System Fans |
| Integrated Smart Array Controller for RAID data protection/performance and maximum data bandwidth |
| Advanced Error Checking and Correcting (ECC) SDRAM Technology |
| Hot Plug Ultra2/Ultra3 Drive Bays |
| Redundant Hot Plug Power Supplies (optional) |
| Redundant NIC support |
| |
|
|
Ser vi ceabi li ty | Internal Diagnostics Display (IDD) indicates specific DIMM or processor failure. |
| LED display on front panel indicates interlock, fan, and power failures. |
| |
| PCI Card Guide holds long PCI cards in place during transit. |
| Customer driven interior system fan design (all system fans interior to chassis) |
| Removable, internal center panel eases access to the power supply and hard drive backplane boards. |
| Optional High Voltage PDU cable exits chassis at a right angle to simplify cable management at rear of chassis. |
|
|
Secu ri ty | |
| Hot plug keyboard password |
| Diskette drive control |
| Diskette boot control |
| Network Server Mode |
| Security Provision |
| Parallel and serial interface control |
| Administrator’s password |
| Disk configuration lock |
| Hot plug access security |
|
|
Power Suppl y | One |
|
|
Requ ired Cabl ing | For required cabling information, refer to the Compaq Web site at |
| http://www.compaq.com/products/servers/proliantDL580/. |
| Note: This Web site is available in English only. |
North America — Version 13 — December 18, 2000 | 3 |
