Removal and Replacement Procedures

4.Turn the computer top side up with the front facing you.

5.Disconnect the diskette drive cable from the low insertion force (LIF) connector on the system board 1 (Figure 5-16).

6.Disconnect the TouchPad cable from the LIF connector on the system board 2.

7.Remove the two M2.5 × 4.5 screws securing the top cover to the base enclosure 3.

8.Lift the top cover straight up to remove it from the base enclosure 4.

Figure 5–16: Removing the Top Cover

Reverse the above procedure to install the top cover.

5–26

Maintenance and Service Guide