Compaq G200 warranty Supporting Documentation, System Requirements, Software Installation

Addendum to the Matrox G200 Multi-Monitor Series User Guide-2

Supporting Documentation

Additional documents are available on the Matrox G200 MMS Graphics CD included with your option kit to assist you with hardware or software installation:

■Matrox G200 Multi-Monitor Series User Guide

■README.TXT file

It is recommended that you read and print the hardware and software installation procedures from the User Guide before you install the Matrox G200 Multi-Monitor Series graphics controller.

System Requirements

NOTE: The following information supercedes the respective section in the user guide.

Your system configuration must meet the following minimum requirements to ensure proper performance of your Matrox G200 Multi-Monitor Series graphics controller.

	Minimum System Configuration
Platform	Compaq Deskpro EN Series Small Form Factor
	Compaq Deskpro Workstation AP250
	Compaq Professional Workstations AP550, SP750
Processor	Intel Pentium III or Pentium III Xeon processor, 500-MHz or above
Type/Speed
ROM	You may need to upgrade your ROM. For more information refer to
	the section titled “Upgrading the ROM” below.
Operating System	Microsoft Windows NT 4.0 with Service Pack 4, Microsoft Windows
	98/95

Software Installation

Upgrading the ROM

Prior to installing new components, you should always check to see if you have the latest ROM installed. Recent ROMPaq releases can be downloaded from: www.compaq.com/support/files