Removal and replacement procedures
Maintenance and Service Guide 4–23
7. If it is necessary to replace any of the display assembly internal components, remove the two round Mylar
screw covers 1 on the display bezel bottom edge. The screw covers are included in the Display Rubber Kit,
spare part number 530999-001.
8. Remove the two Phillips PM2.5×6.5 screws 2 that secure the bezel to the display assembly.
9. Flex the inside of the top and bottom edges 1 and the left and right sides 2 of the display bezel until it
disengages from the display enclosure.
10. Remove the display bezel 3. The bezel is available using one of the following spare part numbers:
❏530992-001—with webcam and microphone, for use with the HP G61
❏534993-001—with webcam and microphone, for use with the CQ61
❏534992-001—with microphone only, for use with the HP G61
❏534995-001—with microphone only, for use with the CQ61