Compaq GS140 External Storage Devices, SW5XX, SW6XX, SW8XX Storage Cabinets SCSI Disk Drives

....................................................................................................................................................................................................................................

.

QUICKSPECS Compaq AlphaServer GS140

Options

Step 8 − Storage Devices − Optional (continued)

External Storage Devices

The following devices can be added as required:

SW5XX, SW6XX, SW8XX Storage Cabinets

SCSI Disk Drives

Tape Drives − TZ87, TZ857 (loader support for Tru64 UNIX available via DECnsr), TZ877, TZ88, TZ885, TZ887, TSZ07, TLZ09, TKZ9E, TKZ9F, TLZ9L, TKZ6x, TL810, TL812, TL820, TL822, TL826, DS-TL891-NE/NT, DS- TL892-UA, DS-TL893-BA/AC, DS-TL894-BA, DS-TL896-BA, DS-TLZ10-VA, DS-TL895-xx, TZK10/12/20

Step 9 − Networks and Communications − Optional

•Connection of system to Ethernet requires twisted-pair cable (except when using DE500-FA).

Note: For installed systems with KFTIA I/O modules, KFTIA includes two 802.3/Ethernet ports per module.

PCI LAN Communications Controllers

•Requires DWLPB-xx PCI shelf mount box (one included)

•Maximum six DEFPA-AB/DB/UB/MB FDDIcontrollers (100 Mb/sec) per system

•Each adapter/controller uses one PCI slot

	Maximum # Supported
	Tru64 UNIX	OpenVMS
	PCI/System	PCI/System
PCI 1-port 10/100-Mb Ethernet adapter (Twisted Pair); SN-PBXNP-AC	8/8	8/8	3X-DE600-AA
(Token Ring Adapter) not supported in same system; requires
NHD1 of Tru64 UNIX (UCX V4.2 TCP/IP Services Software not
recommended with DE60* devices; TCP/IP V5.0 is recommended)
MultiMode Fiber (MMF) add-on daughter card for use with the 3X-	8/8	-	3X-DE602-FA
DE602-AA; Tru64 UNIX NHD2 required
Category 5 cross-over cable for point-to-point, unshielded			BN24Q-xx
Category 5 cross-over cable for point-to-point, shielded			BN28Q-03
Category 5 straight through for system to repeater or hub, unshielded			BN25G-xx
Twisted pair, shielded (-03, -04, -07 available lengths)			BN26M-xx
Universal PCI to FDDI controller Fibre− Single Attachment Station	6	6	3X-DEFPA-AC
(SAS) MultiMode Fibre with SC; requires BN34x SC type
connecting cable
Universal PCI to FDDI controller Fibre− Dual Attachment Station (DAS)	6	6	3X-DEFPA-DC
MultiMode Fibre with SC; requires BN34x SC type connecting
cable
MultiMode Fibre Optic Duplex cable; SC connector-to-ST connector			BN34A-xx
MultiMode Fibre Optic Duplex cable; SC connector-to-SC connector			BN34B-xx
MultiMode Fibre Optic Duplex cable; SC connector-to-MIC connector			BN34D-xx
Universal PCI to FDDI controller, copper− Dual Attachment Station	6	6	3X-DEFPA-
(DAS) CAT 5 UTP with RJ; , requires BN26x or BN25H connecting			MC
cables
Universal PCI to FDDI controller Copper− Single Attachment Station	6	6	3X-DEFPA-UC
(SAS) CAT 5 UTP with RJ; requires BN26x or BN25H connecting
cables
8-pin MP-to-8-pin MP, screened, EIA/TIA category 5 cable			BN26M-xx
8-pin MP-to-8-pin MP, screened, crossover, EIA/TIA category 5 cable			BN26S-xx
3-m unshielded twisted pair RJ45 connectors			BN25H-03
PCI Gigabit Ethernet adapter, does not support network boot; one per	4	4	DEGPA-SA
DWLPB

10DA-10051-00A-008 — 02.28.2000