QUICKSPECS | Compaq AlphaServer GS140 |
| |
Options
Step 16 − Expansion: System Cabinet and I/O Expansion Cabinet − Optional
System Cabinet
•Expanded Base System Cabinet includes two 3-phase power regulators with space for one additional 3-phase power regulator. System cabinets shipped after June 1996 (H9F00-FC/FD/FE Rev B03 or later) include the H7263-AC/AD non-battery backup ready power regulator.
•Maximum four I/O channels per cabinet; PCI Plug-in Units require one I/O channel connection
•Four lower expansion bays are available for Plug-in Units; the lower bays accommodate Plug-in Units as follows:
-Disk Plug-in Unit (BA670-AA/AB), maximum of four, front or rear expansion bay
-Battery Plug-in Unit (H7237-AA/AC/CA/CB), maximum of one, front or rear expansion bay
-PCI Plug-in Unit (DWLPB-AA), maximum of two, rear expansion bay only
I/O Expansion Cabinet
•I/O expansion cabinet includes one 3-phase power regulator, and provides space for two additional 3-phase power regulators
•H9F00-JC/JD/JE Rev C03 or later cabinets include H7263-AC or H7263-AD non-BBU capable power regulator
•I/O Expansion cabinet can be configured to hold all disk Plug-in Units or combination of disk Plug-in Units and PCI Plug-in Units
•Six expansion bays – two upper and four lower – are available for Plug-in Units; the two upper bays accommodate a maximum of two disk Plug-in Units; the four lower bays accommodate Plug-in Units as follows:
-Upper bay – Disk Plug-in Unit (BA670-AA/AB, maximum two, front or rear expansion bay
-Lower bay – Disk Plug-in Unit (BA670-AA/AB), maximum four, front or rear expansion bay
-Lower bay – PCI Plug-in Unit (DWLPB-AB), maximum two, rear expansion bay only
-Lower bay – Battery Plug-in Unit (H7237-AA/AC/ CA/CB), maximum one, front or rear expansion bay
I/O expansion cabinet (top gun blue) 3-phase power, maximum two per system; | H9F00- |
JC = 60 Hz, 208V, JD = 50 Hz, 380/416V, JE = 50/60 Hz, 202V | JC/JD/JE |
PCI Plug-in Unit for GS140 and 8400 I/O expansion cabinet only, maximum two per cabinet; | DWLPB-AB |
maximum six DWLPB-AA and DWLPB-AB (PCI PIU) per system; requires one I/O channel | |
connection on KFTHA-AA | |
Second PCI expansion box for mounting in DWLPB-AB, maximum one per DWLPB-AB; requires | DWLPB-BB |
one I/O channel connection on KFTHA-AA | |
Step 17 − Power Expansion Components − Optional
•System Cabinet and I/O Expansion Cabinets must be same type, either 3-phase or single-phase; mixing of 3- phase and single-phase cabinets in same system configuration is not supported
•Determine the need for adding third power regulator by filling in the EPU Power Configuration Table
•Power Configuration Table provides a manual method for determining the need for a third power regulator. Equivalent power unit (EPU) is an equivalent value of power used (48 VDC) by each option.
3-Phase Expansion Components
•Select additional H7263-AC/AD for expansion cabinets that do not require battery backup option: If EPU value of first regulator is exceeded, if N+1 redundancy is required, if third power regulator is required
•Select H7237-CA/CB for systems that require battery backup (factory installed). It includes battery Plug-in Unit, one H7263-AA/AB power regulator, and batteries for battery backup/UPS capability. It must be ordered at time of system purchase if BBU functionality is required. H7263-AA/AB mounts alongside the standard H7263-AC/AD. It provides eight minutes per regulator.
•Select H7238-BA/BB for additional battery UPS (factory installed). Includes H7263-AA/AB and H7238-AA 4- pack battery option for second and third regulator support
Battery option for I/O Expansion Cabinet, fully loaded battery cabinet supports three power regulators; H9B00-AF provides 16 minutes per regulator; maximum one per H9F00-BA/BB/BC expansion cabinet
Power Option for StorageWorks Shelves in StorageWorks Plug-in Units
•Provides N+1 power for BA670-AB, BA671-AA StorageWorks PIUs/shelves; occupies one slot in StorageWorks shelf
48 VDC 150W Redundant Enhanced Power Supply for BA670-AB, BA671-AA, includes 48 VDC jumper | DS- |
cable for connecting to first power supply in StorageWorks shelf. | BA35X-HJ |
