Notes on power cabling | Power Supply Concept |
Two basic units with two UPSs
UPS
UPS
Single-phase or
3-phase input
Figure 74: Two basic units with two UPSs
You can connect two basic units to two UPS devices as shown in figure 74. In this case you must take into account that each UPS must provide approximately 10240 Watts to power both basic units, if required. Therefore each UPS must provide sufficient power. You will also need to make sure that the alert mechanism of both UPS solutions notifies both servers in the event of a failure.
130 | Operating Manual | BX600 S3 |
