Fujitsu BX600 S3 manual Connecting External Devices, Connectors on the back of the basic unit

Connecting External Devices Installing the Hardware

Connectors on the back of the basic unit

NET2

NET4

3

4

Figure 9: Connectors for external devices

NET1

NET3

7

6

5

NET1,	Connectors of various types I/O blades, connected to the server blades on-board
NET2	NICs. These I/O blades can be Ethernet switch blades or Ethernet pass-thru blades,
	see “Ethernet LAN I/O Blades” on page 79.
NET3,	Connectors of various types I/O blades, connected to the optional I/O modules of the
NET4	server blades. These I/O blades can be Ethernet or Fibre Channel switch blades or
	pass-thru blades, see “Ethernet LAN I/O Blades” on page 79 and “Fibre Channel
	I/O Blades” on page 101.
3	Serial port connector on management blade 2 (see also figure 61 on page 114).
	Standard serial port, management communication port.
4	LAN connector on management blade 2 (see also figure 61 on page 114). LAN
	port, RJ45, 10Mb management LAN.
5	Serial port connector on management blade 1 (see also figure 61 on page 114).
	Standard serial port, management communication port.
6	LAN connector on management blade 1 (see also figure 61 on page 114). LAN
	port, RJ45, 10Mb management LAN.
7	KVM connector on rear KVM blade, which offers VGA, PS2 keyboard and mouse
	support via a special cable (see figure 10 below). The Adv. KVM bladeand the digital
	KVM blade also offers a LAN connectors (RJ45, 10 Mb) (see also figure 66 on
	page 120).

42 Operating Manual BX600 S3