Installing the Hardware | Connecting External Devices |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VGA | keyboard | mouse | to rear | |||
|
| (purple) | (green) | KVM board | ||
Figure 10: Special cable
4.4.1Cable Routing
The cables are routed directly on the rack support uprights.
PCI Cards with Cable at the Front
If a PCI expansion module is installed in a server blade, you will have to connect the PCI port with an external device on the back of the rack. To route the cable from the front to the back of the rack, use the side slots of the rack with a cable bezel as shown in figure 11 below. You may also route the cable to the back of the rack, using the space below the basic unit.
BX600 S3 | Operating Manual | 43 |
