Ethernet I/O Blades | Installing an I/O Blade |
|
|
|
|
Figure 46: Disengaging the dummy module
ÊSwing the handle (a) in the direction of the arrow (2) until the locking mechanism of the dummy module disengages.
Figure 47: Removing the dummy module
ÊRemove the dummy module from the slot (2).
VCAUTION!
Keep the dummy module for future use. If you remove the I/O blade and do not replace it with a new one, you must reinstall the dummy module.
Installation is the same as for the I/O blade (see “Inserting the I/O Blade” on page 98).
BX600 S3 | Operating Manual | 97 |
