Fujitsu BX600 S3 manual Features

Preface Features

Gbit Ethernet LAN Switch Blade (SB9F) 12x1 Gbit

–30 internal 1Gbit ports to the server blades

–12 external 1Gbit ports (RJ45)

IThis switch blade can only be installed in slots NET1 and NET2. The number of available ports depends on the types of server blades installed, see page 80.

10 Gbit switch blade 10/2

–10 internal 10 Gbit/s ports to the server blades

–2 external 10 Gbit/s ports with optional X2 transceiver modules for Fiber-Optical or CX4 copper cable

IThis switch blade can only be installed in slots NET3 and NET4 and supports only server blades with a 10-GbE daughter card, see page 84.

Ethernet LAN Pass-Thru-Blade

This I/O blade provides ten RJ45 ports for direct (“pass-thru”) connections to the server blades.

–10 internal 1Gbit ports to the server blades

–10 external 1Gbit ports (RJ45)

All switch blades are hot-swappable. By installing two switch blades, redundant LAN connections can be provided for the server blades.

●Fibre Channel I/O Blades

The following I/O blades are available for connecting the server blades to SAN environments:

2/4 Gbit Fibre Channel Switch Blade Brocade SilkWorm 4016

–10 internal 2Gbit/s ports to the server blades

–6 external 4Gbit/s ports via a GBIC/SFP module

IIn addition to the 16-port variant, a model with 12 dynamically assignable ports is available (e.g. 4 external and 8 internal ports). You can upgrade this model to a 16-port variant later.

BX600 S3 Operating Manual 11