Installing the Hardware | Connecting External Devices |
ÊInsert the server blades into their slots (see section “Adding a Server Blade to the Basic Unit” on page 74). Return the power supply units and fan units to the basic unit (see section “Replacing a Power Supply Unit” on page 133 and section “Replacing the Fan Unit” on page 141).
You remove the basic unit by following the above steps in reverse order:
VCAUTION!
Please note the relevant safety instructions in section “Notes on Installing in the Rack” on page 27.
ÊNote the slot assignment of the server blades so that you can insert them correctly again after you have removed the basic unit from the rack.
ÊRemove server blades, fan units and power supplies from the basic unit to reduce weight.
ÊRemove the four knurled screws.
ÊPull out the basic unit and carefully remove it from the rack.
4.4Connecting External Devices
The external connectors of the PRIMERGY BX600 S3 basic unit are located on the rear of the basic unit. The external connectors of the server blades are located on the front of the basic unit. For information on these connectors see the operating manuals of the different server blade types (see “Related Publica- tions” on page 157).
BX600 S3 | Operating Manual | 41 |
