
Adding a Server Blade to the System | Server Blades |
|
|
|
|
Figure 33: Final engaging of the locking mechanism
ÊPress the eject handles to enable the locking mechanism to engage fully.
Removing the Server Blade
The server blade is removed in the same way as the dummy module (see “Removing the Dummy Module” on page 74).
VCAUTION!
Read the safety information and the information on handling electrosta-
When you remove the server blade and do not replace it with a new one, you must insert a dummy module in the empty slot. Make sure that the dummy module engages in the slot correctly.
78 | Operating Manual | BX600 S3 |