Fujitsu BX600 S3 manual Fibre Channel SFP Module, Inserting a Fibre Channel SFP module

Fibre Channel I/O Blades Fibre Channel SFP Module

9.5Fibre Channel SFP Module

A Fibre Channel SFP module is required to connect an FC pass-thru blade port to a Fibre Channel cable. If no cable is plugged in, the SFP module slots must be fitted with a safety plug as shown in the figure below.

Figure 54: Fibre Channel SFP connector

Inserting a Fibre Channel SFP module

For each server blade connected via Fibre Channel, SFP modules must be plugged into the appropriate FC pass-thru blade slots. For information on the port assignment see section “Port Assignment” on page 109.

Figure 55: Inserting an SFP module

ÊPush the SFP with the label facing upward into the slot assigned to the server blade to be connected.

BX600 S3 Operating Manual 107