Fujitsu BX600 S3 manual Removing the I/O Blade, Inserting the I/O blade a = green touch point

Ethernet I/O Blades Installing an I/O Blade

Figure 49: Inserting the I/O blade (a = green touch point)

ÊPush (1) the I/O blade as far as possible into the desired slot (here slot 2).

ÊSwing up (2) the eject handle (a) of the I/O blade until the locking mechanism of the I/O blade engages.

Removing the I/O Blade

The I/O blade is removed in the same way as the dummy module (see “Removing the Dummy Module” on page 96).

VCAUTION!

Read the safety information and the information on handling electro- static-sensitive components in the section “Components With Electro- static-Sensitive Devices” on page 25.

If you remove the I/O blade and do not replace it with a new one, you must insert a dummy module in the empty slot to ensure cooling, to comply with the appli- cable EMC regulations (regulations on electromagnetic compatibility) and for fire protection.

Make sure that the dummy module engages in the slot correctly.

BX600 S3 Operating Manual 99