Updating BX600 System Components Preparation for Use and Operation
5.4.3Updating the Switch Blade Firmware
IBefore you update the firmware, you must allocate IP addresses to the individual switch blades.
Proceed as follows:
ÊSwitch on the basic unit and start the management console (Telnet) of the management blade.
⎜ |
|
| Console Menu | page_root | ⎟ |
⎜ |
|
| ⎟ | ||
⎜ (1) | Management Agent |
|
| ⎟ | |
⎜ | (2) | Emergency Management Port |
|
| ⎟ |
⎜ (3) | Console Redirection |
|
| ⎟ | |
⎜ | (4) | TFTP upgrade |
|
| ⎟ |
⎜ (5) | Logout |
|
| ⎟ | |
⎜ | (6) | Reboot Management Blade |
|
| ⎟ |
⎜ (7) | System Information Dump |
|
| ⎟ | |
⎜ | Enter Selection: 3 |
|
| ⎟ | |
ÊIn the management blade console, select the menu item Console Redirection.
⎜ |
| Console Redirection Table | page_0. | ⎟ |
⎜ |
| ⎟ | ||
⎜ (1) Console Redirect Server Blade |
| ⎟ | ||
⎜ | (2) | Console Redirect Switch Blade |
| ⎟ |
⎜ (3) | Set Return Hotkey , Ctrl+(a character) : 0 |
| ⎟ | |
⎜ | Enter selection or type (0) to quit: 2 |
| ⎟ | |
ÊIn the Console Redirection Table menu, select the menu item Console Redirect Switch Blade.
64 | Operating Manual | BX600 S3 |
