Overview
Configuration Steps
•For a complete configuration of the ProLiant BL20p, do the following:
1.Select BL p-Class server blades
•Single Intel Pentium III 1.40-GHz processor, 512-MB ECC SDRAM (230040-B21)
or
•Two Intel Pentium III 1.40-GHz processors, 1-GB ECC SDRAM (Note: Additional options include processors, memory, and Gb NIC) (257959-B21)
PLUS
2.Decide how many BL p-ClassServer Blade Enclosures to purchase (each enclosure can hold up to 8 ProLiant BL20p server blades)
•BL p-Class server blade enclosure with 8 Rapid Deployment Pack licenses (281404-B21)
or
•BL p-Class server blade enclosure with Rapid Deployment Pack trial (243564-B21)
PLUS
3.Select an Interconnect. Interconnects are sold in pairs. One pair of Interconnects is required with each BL p-Classserver blade enclosure
•BL p-Class RJ-45 Patch panel (with 32 RJ-45 connectors)
(230766-B21) or
•ProLiant BL p-Class C-GbE Interconnect Kit (with 4 RJ-45 10/100/1000 T/TX/T and 4 RJ-45 10/100 T/TX uplink connectors) (249655-B21)
or
•ProLiant BL p-Class F-GbE Interconnect Kit (with 4 LC 1000 SX and 4 RJ-45 10/100 T/TX uplink connectors)
(279720-B21)
PLUS
4.Select BL p-Class power enclosure and power supplies based on configuration. Use p-Class sizing tool to help determine power configuration http://www.compaq.com/products/servers/ proliant-bl/p-class/index.html
Note: This Web site is available in English only.
Note: Power enclosures and supplies are not needed if using facility DC (-48V ± 10%).
•Single phase power enclosure with four hot-plug power supplies (239162-001)
or
•Three-phase power enclosure with six hot-plug power supplies (230769-001)
PLUS
5.Select power distribution
•Scalable bus bar - Supports up to 5 server blade enclosures (240560-B21)
or
•Mini bus bar – Supports up to 3 server blade enclosures (240559-B21)
or
•Power Bus Box - connects 1 power enclosure to 1 server blade enclosure (240562-B21)
DA-11411 | Canada — Version 1 — August 26, 2002 | 2 |
