![](/images/new-backgrounds/1187824/18782425x1.webp)
Chapter 2 - Getting Started | 7 |
Ethernet Connection Requirements
The MicroRouter 1270i’s Ethernet interfaces directly support 10BaseT
10Base-T Twisted-Pair Ethernet
To connect the router's Ethernet interface to
Note: Ethernet cables and cable connectors are not supplied with vthe MicroRouter product. Please contact your reseller or your Compatible Systems representative for information on obtaining the correct Ethernet cabling supplies.
T1 Line Connection Requirements
The MicroRouter 1270i includes an integrated fractional or full T1 CSU/DSU. To connect this interface to a T1 line, you will need an
Note: The MicroRouter 1270i includes loopback features which can vbe used to check the functionality of your T1 line. Before attempting to route network traffic, use these features to check the line’s basic integrity.
Other Telco Line Connection Requirements
In order to connect to
Note: Before attempting to connect the MicroRouter 1270i’s vsecondary port to a leased telco line, use the loopback features of your external CSU/DSU to check the line. This can save you a considerable amount of time, since the more equipment you have on the line, the more difficult it becomes to determine where a problem is occurring.