Chapter 5 - Command Line Management 17
B. Use the save command to save the changes to the device’s
Flash ROM.
•You may also use CompatiView from a reconfigured IP host (if
using the IP transport protocol), or anywhere on your network
(if using the IPX transport protocol). Instructions for these
two methods are given in Chapter 4 - CompatiView Software
Installation.
With CompatiView, basic IP parameters can be set using the
TCP/IP Routing: Ethernet0 Dialog Box. Use the Save to/
Device option under the File menu to save the changes.
After you have set these IP parameters and saved the changes, you can
use Telnet to access the router from any node on your IP network.
Invoke the Telnet client on your local host with the IP address of the
router you wish to manage.