CompuSTAR manual Valet Mode, Safety Shut Down Features, Turbo Mode 2W900FMR

Valet Mode

While the vehicle is in valet mode, only the keyless entry function will be available. Valet Mode is very useful when loaning your vehicle or having it serviced.

In order to enter Valet mode, press buttons (I+III) simultaneously for a 1/2 second. In order to manually enter Valet Mode, insert your key into the ignition and turn the ignition on, then off, (between ACC and ON) five times within 10 seconds.

You can exit Valet Mode only by pressing buttons (I+III) simultaneously for a 1/2 second.

Safety Shut Down Features

The CompuStar 2W900FMR, 2W900FMR-2 nd system has several shut down safety features. The following actions will shut down the engine or prevent the car from auto-starting : Opening the hood, pressing the brake, or if Valet Mode is turned on.

Turbo Mode (2W900FMR)

If this optional Turbo Mode has been programmed at the time ofinstallation,

you can turn this feature on and off by pressing buttons (III+IV) for a 1/2 second. In this mode, if the emergency brake has been set, the engine will continue to run after the key has been taken out of the ignition. It will run until two minutes after the emergency brake has been set.

•To utilize this mode, the emergency brake sensing wire has to be connected to the emergency brake wire of the vehicle. Consult the authorized dealer for this mode.

•This option is ideal for turbo-charged vehicles because it allows the turbo too slowly cool after operation.

2nd Car Mode (2W900FMR-2nd)

This Remote-Pager is able to operate a 2nd vehicle.

Press buttons III&IV simultaneously for 1/2 second. If this mode is turned to 2 nd Car, the Remote-Pager will not communicate with the 1st vehicle. To Exit 2 nd Car press buttons III&IV simultaneously again.

Page 12 Page 13