PREVENTATIVE
MAINTENANCE
SCHEDULE
To maintain the best performance, you should follow the maintenance recommendations outlined here and in any included manuals from component manufacturers.
●Weekly, or as often as needed
❒Check and clean the pump inlet filter.
An inlet filter has been provided to protect the pump from solid material that can enter and damage the pump impellers. material can enter the vacuum line if a loader filter is improperly installed or if if has a hole in it. Replace the pump inlet filter if it is torn or worn.
❒Check all V/belts.
The V/belts have a tendency to stretch, so an adjustable motor base is provided. Keep belts tight to prevent slip- page and wear. Do not use belt dressings.
●Every 500 hours of operation
❒Grease the pump.
Use No. 2 bearing grease or the equivalent. Refer to manuals from the component manufacturer for additional information and instructions.
●Every 1500 hours of operation
❒Change the oil.
The vacuum pump has been filled with the proper oil and tested by Conair before shipment. Even so, this oil should be changed periodically. Use SAE 40 regular or an equivalent oil.
●Every three months
❒Check motor bearings and grease, if necessary. The motor is equipped with
you should add 1/4 oz. of grease per bearing every three months. Use a quality,
for additional instructions.
5 | Positive Displacement Pump | IMB036/0898 |