IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS

BEFORE OPERATING

APPLIANCE

DANGER – Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock: 1. Always unplug appliance immediately

4. Never operate this appliance if it has a damaged

cord or plug, if it is not working properly, or if it

has been dropped or damaged, or dropped into

water. Do not attempt to repair the appliance.

Incorrect reassembly or repair could cause a risk

of fire, electric shock, or injury to persons when

the appliance is used. Return the appliance to an

authorized service center for examination and repair.

5. Keep the cord away from heated surfaces. Do

not allow cord to contact heated surfaces. Do not

pull or twist cord. Let appliance cool completely

before putting away. Loop cord loosely around

appliance when storing.

6. This appliance has a polarized plug (one blade is

wider than the other). As a safety feature, this plug

will fit in a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician. Do

15.Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.

16.Burns could occur from touching hot parts, hot water, or steam. Use care when you turn a steam appliance upside down – there may be hot water in reservoir.

17.To reduce likelihood of circuit overload, do not operate another high wattage appliance on the same circuit.

18.When installing or removing attachment, please be sure the unit is off and no steam is being released to avoid contact with hot water.

19.Use caution when installing or removing attachment as it may contain hot water from condensation. Ensure the attachment is dry or cooled off to avoid contact with hot water.

DUAL VOLTAGE

This is a 120/240V dual voltage appliance and may

OPERATING

INSTRUCTIONS

HOW TO USE

1.

Be sure garment steamer is unplugged.

2.

Release handle by pushing red button.

3.

While holding main body of steamer, twist steamer

 

head counterclockwise and lift it to remove.

4.

Fill reservoir with ordinary tap water to max fill

 

line. DO NOT OVERFILL.

5.

Replace steamer head on steamer body, twisting

 

clockwise into locked position.

6.

If steam is spitting or dripping, this indicates that

 

there may be too much water in the unit. For the

 

best performance, we strongly recommend filling

 

the reservoir with less water.

Note: To reduce or eliminate the occurrence of mineral build - up, we recommend the use of de-mineralized or distilled water in the unit.

To decalcify, use a solution of 1/3 white vinegar and 2/3 water in the water container. Plug the unit into electrical outlet. Turn to the ON position and run until half the amount has steamed. Turn the unit to the OFF position, unplug from electrical outlet, and allow to sit for 30 minutes.

Remove excess water from the reservoir by lifting the unit, inverting and pouring the water over sink, and allowing water to drain from internal reservoir. Repeat the above procedure as many times as necessary until a normal steam rate returns, usually 2-3 times. With each repeated cycle, use a fresh solution of vinegar and water. Run one cycle of fresh, cold water through the unit at the completion of decalcification,

TO MAKE CREASES OR PLEATS

1.Hang garment.

2.Fold fabric where crease or pleat is desired. Hold fold in place while applying steam directly to fold.

TO STEAM TIES

1.Hang tie on hanger.

2.Apply steam directly to tie.

TO STEAM SHOULDERS AND SLEEVES

1.Hang garment, preferably on a padded hanger.

2.Fill out shoulders or sleeves with folded towel.

3.Apply steam to garment.

GETTING TO KNOW

YOUR STEAMER

LIMITED ONE-YEAR WARRANTY

Conair will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed below, together with your purchase receipt and $5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 12-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

portable

fabric steamer

after using.

2. Do not place or store appliance where it can fall or be pulled into a tub or sink.

3. Do not place in, or drop into water or other liquid.

4. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING To reduce the risk of burns, electrocution, fire, or injury to persons:

1.

This appliance should never be left

 

unattended when plugged in.

2.

Close supervision is necessary when this

 

appliance is used by or near children, or

 

individuals with certain disabilities. Unsupervised

 

use could result in fire or personal injury.

3.

Use this appliance only for its intended use as

 

described in this manual. Do not use attachments

 

not attempt to defeat this safety feature.

7.

Never drop or insert any object into any opening.

8.

Do not use outdoors or operate where aerosol

 

(spray) products are being used or where oxygen

 

is being administered.

9.

Do not use an extension cord to operate appliance.

10.

Surfaces of this appliance may be hot when in

 

use. Do not let heated surfaces touch eyes or

 

bare skin.

11.

Do not place the steam nozzle directly on any

 

surface or on the appliance power cord while it is

 

hot or plugged in.

12.

Unplug this appliance before filling or emptying.

 

Do not overfill.

13. While emitting steam, this appliance may cause

 

burns if it is used too close to the skin, scalp or

 

eyes, or if it is used incorrectly. To reduce the

 

risk of contact with hot water coming from steam

be used in the United States and abroad without an electricity converter.

An adapter plug (not included) may be necessary when using this appliance in some foreign countries. If so, plug the steamer into correct adapter plug for your location and plug assembly into electrical outlet.

NOTE: This unit is thermostatically protected to shut off when water has boiled away. You should unplug the unit before this occurs because surfaces continue to heat, which could be hazardous and may damage unit. Before using the garment steamer for the first time, it is recommended to operate the steamer for approximately 5 minutes, unplug the unit and allow it to cool. Empty container and refill before actually using.

SAVE THESE

7. Attach brush accessory to steamer if desired.

(Please refer to brush attachment section.)

8. Place appliance on a flat surface in an upright

position. Plug into electrical outlet.

9. Within a few minutes, the unit will begin to emit a

continuous flow of steam from the steam vents. The

garment steamer is now ready to use.

10. Hold steamer by its handle when using. Do not

grasp body of unit while steaming garments or while

unit is hot.

11. Direct the flow of steam toward garment to remove

wrinkles. Do not touch fabric with steam head. However,

do not tilt steamer upward as hot water may leak.

DECALCIFICATION

If the appliance begins to produce steam more slowly than usual, if the steamer stops producing steam and then starts again, you may need to decalcify

before using the unit again to steam garments.

BRUSH ATTACHMENT

Your garment steamer includes a brush attachment for extra grooming and care of all your clothes. The brush helps the steam penetrate the fabric by separating the fibers. You can use the steamer to effectively remove wrinkles with or without using the brush attachment. Do not attempt to attach or remove the brush attachment while unit is steaming or hot. Wait until unit is completely cool. Place the brush onto the steamer head by simply pushing the brush onto the front of the steamer head. The wider portion of the brush attachment should be toward the bottom of the unit.

TO STEAM GARMENTS OR DRAPES

1.

Hang up garment/drapery.

2.

Gently hold fabric taut with one hand and hold

Removable fabric/lint brush

8’ Line Cord

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights and you may have other rights which vary from state to state.

Service Center

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

For information on any Conair products call: 1-800-3-CONAIR or visit us on the web at http://www.conair.com

Removes

Wrinkles

from

Garments

and

Drapes

 

 

r T

 

 

 

t fo

rav

 

 

a

 

e

 

 

 

l

 

e

 

 

r

 

 

 

G

 

 

 

 

F

 

 

 

o

 

 

e

l

 

 

di

d

 

ng

Han

l

 

 

not recommended by the manufacturer.

vents, test appliance before each use by holding

it away from body.

14. Do not operate steamer without properly filling

the water container.

INSTRUCTIONS

your steamer. Decalcification refers to removing the calcium deposits which form over time on the metal parts of the Steamer. For best performance from Conair Garment Steamer, decalcify the unit from time to time. The frequency depends upon the hardness of your tap water and how often you use the Steamer.

steamer with the other hand. Hold steamer near

the garment/drapery so that steam is directed

toward it. Use only in vertical position.

3. Slowly run the steam head up and down and side

to side. To remove stubborn wrinkles, move the

garment steamer very slowly.

Folding Handle

Worldwide Dual Voltage

©2009 Conair Corporation

East Windsor, NJ 08520, Glendale, AZ 85307

Made in China

08PA11275IB-8909A

®

For your safety and continued enjoyment of this product, always read

the instruction booklet carefully before using.

Model GS1

Page 1
Image 1
Conair GS1 warranty Dual Voltage, HOW to USE, To Make Creases or Pleats, To Steam Ties, To Steam Shoulders and Sleeves