Connect Tech DFlex-4/104 Appendix D: SLIM Insertion/Removal

Chapter 4: Appendix D - SLIM Insertion/Removal 4-11

DFlex-4/104 User's Manual, ver. 0.04

Appendix D: SLIM Insertion/Removal

SLIM insertion

Figure 11 outlines the correct procedure for removing RS-232,

RS-485/422, RS-423 and 20mA current loop Serial Line Interface

Modules (SLIM).

Figure 11: SLIM insertion

Clip

Peg

Hole

1. Place the SLIM into the socket almost vertically (about 75-

degree angle), making sure that it is properly oriented and

fully inserted into the socket.

2. Press downward and sideways on the SLIM until it latches

into the socket. Do NOT force the SLIM, the installation

process requires a small force and should be very smooth and

easy. If you encounter resistance then re-check the orientation

and insertion depth.

Contents

Main Connect Tech Inc. DFlex-4/104 Page LIMITED WARRANTY Copyright Notice Trademark Acknowledgment Page Page Table of Contents Page List of Tables List of Figures Page Chapter 1: Introduction Page Page Page Page Page Chapter 1: Introduction 1-5 DFlex-4/104 User's Manual, ver. 0.04 Figure 2: DFlex-4/104 - 16 port configuration Page Page Page Page Page Chapter 2: Hardware Installation Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Chapter 3: Software Installation Page Page Page Page Utilities Chapter 4: Appendices Page Appendix A: Specifications Page Appendix B: Connectors/Pinouts Page Page Page Appendix C: Factory Settings Page Page Page Appendix D: SLIM Insertion/Removal Page Appendix E: RS-232 SLIM Option Page Page 4-16 Chapter 4: Appendix E - RS-232 Option Table 8: SLIM pinouts Note: earlier versions of the current loop SLIM have pins 22, 23, 32, and 33 tied low. Appendix F: RS-485/422 Options Page Chapter 4: Appendix F - RS-485/422 Options 4-19 DFlex-4/104 User's Manual, ver. 0.04 Figure 14: RS-485/422 SLIM partial schematic 4-20 Chapter 4: Appendix F - RS-485/422 Option Table 9: SLIM pinouts Note: earlier versions of the current loop SLIM have pins 22, 23, 32, and 33 tied low. Page Page Appendix G: RS-423 Options Page Chapter 4: Appendix G - RS-423 Options 4-25 Table 10: SLIM pinouts Note: earlier versions of the current loop SLIM have pins 22, 23, 32, and 33 tied low. Page Appendix H: 20mA Current Loop Option Page Page 4-30 Chapter 4: Appendix H - 20mA Current Loop Table 11: SLIM pinouts Note: earlier versions of the current loop SLIM have pins 22, 23, 32, and 33 tied low.