Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Revision 0.02
9
Description
The processor and Chipset are implemented on the Qseven CPU module, which connects to the
Xtreme/SBC via a MXM connector. As previously mentioned, many of the existing Qseven Modules use
the Intel Atom mobile architecture, Z series processor + Poulsbo / SCH US15W chipset. The Xtreme/SBC
implements a subset of the Qseven features, as describe in the introduction.
For a list of Qseven module vendors, visit http://www.qseven-standard.org/
Connector
Function
Qseven interface
Location
P1
Type
MXM
Foxconn AS0B326-S78N-7F (or equivalent)
Pinout
Refer to Qseven specification
The availability of the graphics interfaces depends on the Qseven module selected.
US15W: The US15W chipset provides GMA 500 graphics sub-system and provides two display interfaces:
SDVO (serial digital video output) and LVDS (low voltage differential signalling). The resolution is
generated by the by GMA 500 is limited 1280x1024.
The configuration of either interface as the primary or secondary display depends on the Qseven module’s
BIOS capabilities and settings. Refer to the Qseven module’s documentation for more details.
Description
The VGA interface is implemented using the Qseven SDVO interface, with a SDVO to VGA converter
(Chrontel CH7317B) which supports resolutions up to 1920x1200; however actually resolutions depend on
the Qseven module.
Connector
Function
VGA graphics
Location
P5
Type
2x5 2mm header
MLE TSHSM-205-D-06-G-V-L (or equivalent)
Pinout
Pin
Signal
Pin
Signal
1
DAC_RED
2
GND
3
DAC_GREEN
4
N/C
5
DAC_BLUE
6
SC_DDC
7
HSYNC
8
SD_DDC
9
VSYNC
10
GND