Connect Tech SSD/104 SATA User Manual
Power Sourcing Explaination
The SSD/104 SATA board powers its mSATA modules from +3.3V. This voltage rail can be provided from the
The SSD/104 SATA board also has Ferrite Beads located near each power source that can be populated or
Hardware Installation Information
Please follow these steps with installing the SSD/104 SATA into your system.
1)Ensure your SBC is powered OFF
2)Install the SSD/104 SATA card onto your PC/104 stack (if available)
3)Install mSATA modules into mSATA slots on carrier
4)Connect SATA cables from SSD/104 Carrier to SBC
5)Power ON your SBC
mSATA SSD Module Information
Connect Tech’s SSD/104 SATA Carrier board allows for the installation of 2 mSATA SSD Modules. mSATA modules should be JEDEC
Both SLC and MLC flash types can be used as well as commercial and industrial operating temperature grades.
mSATA is a relatively new format for
Listing of mSATA SSD Module Vendors |
| |
ADATA | mSATA size comparison | |
AMP Inc. | ||
| ||
Apacer |
| |
Delkin |
| |
Delkin |
| |
innodisk |
| |
Intel |
| |
Kingston |
| |
NetList |
| |
OCZ |
| |
Renice |
| |
RunCore |
| |
Samsung |
| |
Super Talent |
| |
Swissbit |
|
10 | Revision 0.00 |