Contec PPC-HDD(MS)A Master/Slave Arrangement

PPC-HDD(MS)A User's Guide
Master/Slave Arrangement
- PPC-CPU686(MS)
PPC-CPU686(MS)
(PC CPU Module) Master Slave
PPC-HDD(MS)A or
PPC-SDD(MS)-xx
(Disk unit)
Connect the master and slave disk units
with an IDE connection cable.
Connect the PC CPU Unit to the master disk unit with an IDE
connection cable.
Set this to Master (M).
Set this to Slave (S).
- PPC-CPU852(MS)
IDE
UTP
LINK
/TX
100
M.
S.
USER
EXIT
EX.I/F
RGB
RESET
SERIAL1
ERR.
B.RST
BAT.B.STOP
RUN
B.
RDY
PPC-CPU852
KB/MOUSE
RUN
B.
USB
PCMCIA
CF
USB
CAUTION
ACCESS
Connect the PC CPU Unit to the master disk unit with an IDE
connection cable.
PPC-CPU852(MS)
(PC CPU Module)
Connect the master and slave disk units
with an IDE connection cable.
Set this to Slave (S).
Set this to Master (M).
Master Slave
PPC-HDD(MS)A
(Disk unit)
Note!
- Setting the silicon disk unit as the master device involves a restrictions. For details, refer to the
manual for the silicon disk unit.
- To use the hard disk unit along with the dedicated CD-ROM drive [IPC-CDD-02] in a master/slave
arrangement, refer to the manual for the dedicated CD-ROM drive.
7 PPC-HDD(MS)A