ASSEMBLY
•Position the back grille against the motor.
•Use the screw fix the main body.
•Unclose the transparent sticker on back of the fan blade, put the steel washer/steel ring into the pole of back of fan blade.
•Position the front grille against the rear grille so that the holes in the rims that accept the small nut and bolt are in line
NOTE: THERE IS A STEEL RING WHICH FIXES THE PRO FELLER BLADES IN PLACE. DO NOT RELEASE IT.
SPECIAL NOTES
•Do not insert finger or any object into the grill.
•Do not unplug by pulling on the wire.
•Unplug the fan when not in use
•Do not place the fan near flame or other source of heat motor’s axis propeller blade.
•Do not use near water prolect from rain
•Do not use gasoline or any volatile chemicais to clean the fan.
