Features | Display |
•Heat Point and Cool Point. The Wireless Thermostat works with your heating and cooling system to maintain a consistent temperature called a set point. With the Wireless Thermostat, you can specify separate heating and cooling set points. The Wireless Thermostat automatically engages the appropriate heating or cooling system until the room reaches the desired temperature. The Wireless Thermostat follows a programmed
•Navigation control options. The Wireless Thermostat gives you the ability to control your heating and cooling system from the comfort of your couch using multiple navigation control options, including the Wireless Touch Screen, the Mini Touch Screen, the System Remote Control
•Navigation device programming. The Wireless Thermostat is programmable through navigation control options, including the Wireless Touch Screen, the Mini Touch Screen, and the System Remote Control
•Communication with a Control4 controller. The Wireless Thermostat communicates with your Control4 controller to obtain scheduling commands. Along with scheduling, the Wire- less Thermostat receives time (date, day of week, and time) data from the Control4 controller and displays it accordingly. The Wireless Thermostat also displays temperature, the mode (Off, Heat, Cool, and Auto), whether the fan is operating, whether its button’s are locked, and whether the battery needs replacing.
•External temperature sensors available. Through your autho- rized reseller, external temperature sensors are available that allow you to install the Wireless Thermostat in an inconspicuous location. You can then place the easily hidden remote sensor where you want to measure the temperature for your best com- fort level.
•Additional programming. Your authorized reseller can also help you with a variety of configuration changes. See “Additional Programming” on page 22.
6
The Wireless Thermostat size is approximately 3 1/2 inches high by 4 1/2 inches wide. It displays an
•Button 1: System Mode — Changes the mode of operation to Off, Heat, Cool, Auto and Emergency Heat (for heat pumps). See “Change Heating and Cooling System Mode” on page 8.
•Button 2: Fan — Turns Fan On or sets it to be automatically controlled by heating and cooling system. See “Change Fan Settings” on page 11.
•Button 3: Hold — Holds a temperature adjustment for a specified duration (On, 2 Hours, or Permanent), or turns off the Hold feature (see “Change Hold Options” on page 13).
•Button 4 or Button 5: Temperature Down or Up — Adjusts temperature down or up in one degree increments and sets an automatic hold for 2 hours. See “View or Change Temperature Heat and Cool Points” on page 16.