Cooper Lighting I8 Series specifications Number, Circuits Ballast, Leave Blank=Single

PI OPTION ORDERING INFORMATION

Catalog			Circuit
Number		Number of	Wired To
Suffix		Circuits	Ballast
PI 1 BLK		1	Black
PI 2	BLU	2	Blue
PI 2	BLK	2	Black
PI 3 RED		3	Red
PI 3	BLU	3	Blue
PI 3	BLK	3	Black

Catalog Numbering System

The PI System is available in sections up to 8' in length for continuous row wiring by simply plugging the sections together. Each PI section is factory wired to the ballast leads. Color coding of wires is as follows:

PI-1= One Circuit - 2 Wires: one black, one white

PI-2= Two Circuits - 3 Wires: one black, one blue, one white

PI-3= Three Circuits - 4 wires: one black, one blue, one red, one white

When ordering the PI2/PI3 System it is necessary to specify the number of fixtures required for each circuit. Each circuit in fixture must be ordered as a separate line item, with a different hot wire color specified. All wiring to external feeds, using cord or cord & plug, are responsibility of installing licensed contractor. Cord and cord & plug sets must be ordered separately if PI option is chosen.

P I 1 - S i n g l e C i r c u i t P l u g - I n

S A M P L E N U M B E R : P I 1 B L K - W G

P I 2 - T w o C i r c u i t P l u g - I n

S A M P L E N U M B E R : P I 2 B L K - W G

P I 3 - T h r e e C i r c u i t P l u g - I n

S A M P L E N U M B E R : P I 3 B L K - W G

PI1= Single	NG= No Ground (ground
Circuit	provided by fixture body)
	WG= With Ground
BLK=Black Hot
	(separate ground wire
	in harness)

For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information.

PI2= Two	Leave Blank=Single
Circuit	Neutral
	2NEU=Two Neutrals
BLK=Black Hot
BLU=Blue Hot
	NG= No Ground (ground
	provided by fixture body)
Leave Blank=Single
	WG= With Ground (separate
Neutral
	ground wire in harness)
/WHT=White Neutral
/GRY=Gray Neutral

PI3= Three

Circuit

BLK=Black Hot

BLU=Blue Hot

RED=Red Hot

Leave Blank=Single

Neutral

/WHT=White Neutral

/GRY=Gray Neutral

Leave Blank=Single Neutral 2NEU=Two Neutrals

NG= No Ground (ground provided by fixture body) WG= With Ground (separate ground wire in harness)

Modular F-Bay Power Supply

Cooper Lighting’s F-Bay Modular Power Supply option allows external fixture access for safe and easy servicing. There is no need to remove lamps or reflectors to disconnect fixture power with F-Bay Modular Power Supply. Access to the individual fixtures power supply allows servicing without turning off all the fixtures disrupting occupants. F-Bay Modular Power Supply is a time

saver in installation – simply plug & power.

1	2
		No internal fixture	Modular Motion Sensor Option
1. Modular Power Supply Receptacle supplied
mounted into fixture Access Plate.		access required for	supplied with Mounting Box and
2. Modular Power Cord & Plugs in 120, 277, 347,		installation or	Modular Power Supply Receptacle.
		disconnecting power.
& 480V configurations for easy plug & power

into existing supply.

Code Compliance

•UL/cUL Certified for Make/Break under load (UL2549)

•Meets NEC requirements for ballast disconnect (NEC 410.73G)

•Allows for addition of Occupancy Sensor without hard connections

•Receptacles complete with insulating dustcap

Specifications and Dimensions subject to change without notice.	ADF042290
Metalux • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801	08/02/2008 3:00:44 PM