INSTALLATION INSTRUCTIONS
IMPORTANT : READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE
EPL Envoy
Parking Luminaire
Sheet 1 of 5
8/20/08IMI-694
GENERAL: Upon receipt of luminaire thoroughly inspect for any freight damage, which should be brought to the attention of the delivery carrier. Compare the catalog description listed on the packing slip with the luminaire label on the housing to assure you have received the correct merchandise.
SAFETY: This luminaire must be wired in accordance with the national electrical code and applicable codes and ordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure. All work should be done by a qualified electrician.
WARNING: Make certain power is OFF before starting installation or attempting any maintenance.
WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing.
WARNING: Risk of Burn. Disconnect power and allow luminaire to cool before changing lamp or handling luminaire.
WARNING: This luminaire is for use with downlight applications only.
WARNING: RISK OF FIRE! DO NOT mount on or near combustible materials.
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH
NOTE : Use minimum 90°C supply wire rating for connections in
Fixture Orientation Guideline:
Proper orientation of luminaire may vary based upon design requirements specified per given application. Labels are supplied on top of fixture and mounting plate for reference to proper fixture alignment. Align quick mount plate in correct direction by referencing number of fixtures required (double or single row luminaire installation) to direction of arrows. Direction of arrow(s) should be in line with direction of traffic.
LUMINAIRE INSTALLATION:
1.Install quick mount plate on a 4” junction box as shown in (Figure 1). Note the required position of plate to ensure correct light beam orientation from fixture. See guidelines above or labels on top of fixture housing and mounting plate if applicable.
2.Secure hanging hook into the rear hooks of quick mount plate (Figure 2 & 3).
3.Make wiring connection while luminaire is being suspended from hanging hook.
4.Push excess wires and connectors up into the junction box through center access hole.
Figure 1
CENTER ACCESS | QUICK MOUNT |
HOLE | PLATE |
|
Figure 2
QUICK MOUNT
PLATE
FRONT HOOKS
REAR HOOKS
LUMINAIRE
HANGING HOOK
Figure 3 |
HANGING
HOOK
LIFT UP
THEN PUSH |
|
LUMINAIRE |
|
BACK | LUMINAIRE |
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
NOTE: Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADH080771