INSTALLATION INSTRUCTIONS
IMPORTANT : READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE
EPL Envoy
Parking Luminaire
Sheet 3 of 5
8/20/08IMI-694
LAMP INSTALLATION: :
1.To install the lamp, unlatch both latches (Figure 6). Note: Remove tamper proof screws first if luminaire includes (TR)
4).
2.Allow lens to swing open (Figure 7). Lens will remain captive. CAUTION: Support lens while it swings open.
3.Install lamp securely into socket. CAUTION: Verify that lamp source and wattage correspond with the luminaire label.
4.To close the luminaire, rotate lens back up to position. Lift up the lens and align with (4) ribs of top lens on both sides(Figure 8).
CAUTION: Latching luminaire closed prior to having proper alignment will result in lens breakage.
5.Push one side of the latch up to grasp edge of lens and then push inward to complete latching (Figure 9 & 10). Repeat for the other latch.
Figure 6 | PULL TO | PULL TO |
| UNLATCH | UNLATCH |
Figure 7
LAMP 
Figure 8
ALIGN THESE RIBS AS SHOWN BEFORE LATCHING (OTHER SIDE NOT SHOWN)
Figure 9
LENS
LATCH
LATCH UP TO
GRASP EDGE
OF LENS BEFORE
LATCHING
Figure 10 | PUSH TO | PUSH TO |
| ||
| LATCH | LATCH |
SUPPORT LENS
WHILE IT SWINGS
OPEN
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.
NOTE: Specifications and dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADH080771
