HALO®
1Remove connector cover from connector.
2Insert end of wireway channel into connector and tighten
connector mounting philips screw and tighten allen screws
securelyto bus bars.
3Attach 1/2" trade size fitting (supplied by others) to channel
connector using speed nut. The speednut provided with LV211
must be used for surface feed.
4Insert supply wire from transformer secondary as shown and
tighten allen screws securely. Refer to power supply instructions
for recommended supply wire sizes.
5Reinstall connector cover.
701934Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • 770.486.4800 • FAX 770.486.4801
Connector Mounting
Philips Screw
Speed Nut
Buss Bar Allen Screws
1/2" Trade Size Connector
(supplied by others)
Buss Bars
Feed Allen Screws
Cover
Wireway Channel
Connector Mounting
Philips Screw
Cover Screw
Speed Nut
Buss Bar Allen Screws
1/2" Trade Size
Connector
(supplied by
others)
Buss Bars
LV211 Feed
Feeding Wireway Channel with LV211 End feed.
LV211 Feed
2
Cover
Wireway Channel
Connector Mounting Philips Screw
Cover Screw
Speed Nut
Buss Bar Allen Screw
Buss Bar Allen Screw
1/2" Trade Size
Connector
(supplied by
others)
Buss Bars