Cooper Lighting M-LIB3

M-LIB3 Low Impedance Bus Differential Relay

a. Before removing a module, ensure that you are at the same electrostatic potential as the

equipment by touching the case.

b. Handle the module by its front-plate, frame, or edges of the printed circuit board. Avoid

touching the electronic components, printed circuit tracks or connectors.

c. Do not pass the module to any person without first ensuring that you are both at the

same electrostatic potential. Shaking hands achieves equipotential.

d. Place the module on an anti-static surface, or on a conducting surface which is at the

same potential as yourself.

e. Store or transport the module in a conductive bag.

More information on safe working procedures for all electronic equipment can be found in

BS5783 and IEC 147-OF.

1.10 MAINTENANCE

Make reference to the instruction manual of the Manufacturer ;

maintenance must be carried-out by specially trained people and in strict conformity with

the safety regulations.

1.11 FAULT DETECTION AND REPAIR

Internal calibrations and components should not be altered or replaced.

For repair please ask the Manufacturer or its authorized Dealers.

Misapplication of the above warnings and instruction relieves the Manufacturer of any liability.