ENGLISH
What to do if . . .
OUTDOOR LIGHT DOES | Is there power to the fixture? |
NOT COME ON WITH | • Check to see that the circuit breaker has not been tripped. |
MOTION AT NIGHT | • Be sure the wall switch is in the “ON” position. |
| • Be sure that the bulb is not burned out or broken. |
| Is the surrounding external ambient light too bright? (If so the |
| unit may think it’s daytime.) |
| • |
| • Relocate or reposition the unit away from the light. |
| TURN OFF POWER BEFORE CONTINUING. |
| Is the wiring to the fixture loose? |
| • Check wiring, and reconnect if necessary using wire nuts |
| provided. |
|
|
OUTDOOR LIGHT | Is there motion in the detection zone? |
COMES ON FOR NO | • Make sure the sensor is not picking up moving objects such |
APPARENT REASON AT | as trees, traffic, etc. |
NIGHT | TEST FOR YOURSELF. |
| • Cover the sensor lens with cardboard to prevent sensor |
| from detecting motion. If the light stays off, something in |
| the detection zone is triggering the sensor. |
| • If this is the case, reduce the sensitivity. |
| • Reposition motion sensor. |
| *If the light stays on with sensor lens covered, contact |
| customer service. |
|
|
LIGHT STAYS ON AT | Is there motion in the detection zone? |
NIGHT AND DOES NOT | • Make sure the sensor is not picking up moving objects such |
TURN OFF | as trees, traffic, etc. |
| • If this is the case, reduce the sensitivity. |
| • Reposition motion sensor. |
| If there is no motion, then the unit may be in the override mode. |
| • Turn the light switch to the “OFF” position for 40 seconds, |
| and then back to the “ON” position. This will send the unit |
| back into the AUTO mode. |
| *If the light continues to stay on, contact customer service. |
|
|
LIGHT CONTINUOUSLY | The light given off from the unit’s own lamp is affecting the |
BLINKS ON AND OFF AT | motion sensor. |
NIGHT | • |
| • Reposition motion sensor. |
|
|
LIGHT IS ON DURING | Is the switch on the bottom of the motion sensor in the test |
THE DAY | mode? |
| • Move the switch to the AUTO 4 or 12 position. |
| Is the motion detector shadowed? |
| • Reposition motion sensor. |
|
|
CANNOT ACTIVATE | Is the surrounding external ambient light too bright? (If so the |
DUSK TO DAWN MODE | unit may think it’s daytime.) |
AT NIGHT (OVERRIDE) | • |
| • Relocate or reposition the unit away from the light. |
| Are you allowing adequate time to enter the dusk to dawn |
| mode? |
| • Turn power on and off twice within 3 seconds |
| Is there more than one fixture on an indoor wall switch? |
| • If so, put them on separate switches. |
|
|
Five year limited warranty
Cooper Lighting (“the Company”) warrants this product (“the product”) against defects in material or workmanship for a period of five years from date of original purchase, and agrees to repair or, at the Company’s option, replace a defective
6