- Specifications + Dimensions
MOUNTING OPTIONS + ACCESSORIES
HOUSE SIDE SHIELD
Internal house side shield is specially designed to
reduce light concentration behind the pole while
maintaining street side efficiency. Available in
Type II, III, and IV distributions only.
EXTRUDED ARM
Standard extruded arm features internal bolt
guides. Twin support bolts (5/16" on VXS and
1/2" on VXM) secure fixture to pole. Standard
VXM 10" arm should be utilized when applying
luminaires at 90°. Use standard VXS 5" arm
regardless of luminaire orientation on pole.
MAST ARM ADAPTER
Cast aluminum mast arm adapter secures fixture
head to nominal 2" pipe size (2 3/8" O.D.)
horizontal steel tenon arm. Available on VXM
fixture only. Adapter casting slip fits over tenon
arm and is secured via two (2) stainless steel set
screws. Finished to match fixture.
DIRECT MOUNT
Fixture head mounts directly to pole with no
accessory arm required. Cast adapter piece corrects
housing tilt angle to insure horizontal glass
orientation.
PHOTOCONTROL
Medium VXM fixture available with a gasketed
photocontrol receptacle for mounting of a standard
NEMA base photocell (ordered separately). Small
VXS available with an internal button-style
photocell with sensor located on housing top panel.
VANDAL SHIELD
Surface mounted 3/16" thick molded polycarbonate
lens. Treated with UV inhibitor to discourage the
gradual discoloration that results from exposure
to sunlight and metal halide lamps.
TENON ADAPTER
Tenon adapters available to slip fit over poles
equipped with nominal 2" pipe size steel tenons
(2 3/8" O.D., 4" length) or nominal 3" pipe size steel
tenons (3 1/2" O.D., 5" length). Adapter secures to
tenon via two (2) stainless steel set screws.
Painted to match fixture.
WALL MOUNT SUSPENSION
Die-cast clevis and extruded arm attached to
finished wall mount plate. Clevis and plate
assemblies are finished to match luminaire.
Stainless steel 1/2" diameter rod can be finished
to match, or left in a natural finish. Use kit in
conjunction with VXS 5" or VXM 10" extruded arm
accessories. Four (4) lag bolts necessary to secure
bracket to wall (provided by others).
WALL MOUNT ADAPTER
Two-piece cast aluminum wall mount adapter kit.
Back panel secures to wall via four (4) bolts
(supplied by others). Internal prop rod assembly
supports fixture weight during installation,
providing easy access to internal wiring
compartment. Available as a direct mount kit or
with a 5" (VXS), or 6" (VXM) extruded arm to offset
fixture from wall.
POLE MOUNT SUSPENSION
Die-cast aluminum clevis assemblies attach at top
of fixture and pole with stainless steel hardware.
Clevis assemblies are painted to match fixture.
Stainless steel 1/2" diameter structural rod can be
finished to match, or left in natural finish. Use kit
in conjunction with standard VXS 5" or VXM 10"
extruded arm accessories.
17
VISION SITE Architectural Area Luminaire
12''
[305 mm]
Set
Screws
Top Cap
Button-style Photocontrol
or
Photocontrol Receptacle
VXS only
VXM only