Eiki EIP-1600T owner manual Specifications

Specifications

Product type	Projector
Model	EIP-1600T
Video system	NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/
	DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50
Display method	Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments
DMD panel	Panel size: 0.65", 1chip DMD
	Drive method: Digital Light Processing (DLP™)
	No. of dots: 983,040 dots (1280 [H] ⋅ 768 [V])
Lens	1–1.15 ⋅ zoom lens, F2.4–2.6, f = 19.0–21.9 mm
Projection lamp	275 W DC lamp
Component input signal	RCA connector
(INPUT1/2)	Y: 1.0 Vp-p, sync negative, 75 Ω terminated
	PB (CB): 0.7 Vp-p, 75 Ω terminated
	PR (CR): 0.7 Vp-p, 75 Ω terminated
S-video input signal	4-pin mini DIN connector
(INPUT 3)	Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
	C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
Video input signal	RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
(INPUT 4)	terminated
Computer RGB/	15-pin mini D-sub connector
Component input signal	RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
(INPUT 5)	HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
	VERTICAL SYNC. SIGNAL: Same as above
HDMI input signal	HDMI terminal (video signal only)
(INPUT 6)
Horizontal resolution	720 TV lines (DTV720P)
Vertical frequency	45–85 Hz
Horizontal frequency	15–70 kHz
Pixel clock	12–85 MHz
RS-232C terminal	9-pin mini DIN connector
TRIGGER terminal	Power jack: DC 12V output
Rated voltage	AC 100–240 V
Input current	3.7 A
Rated frequency	50/60 Hz
Power consumption	355 W (Lamp Setting	“Bright”)/
	310 W (Lamp Setting	“Eco + Quiet”) with AC 100 V
	340 W (Lamp Setting	“Bright”)/
	300 W (Lamp Setting	“Eco + Quiet”) with AC 240 V
Power consumption (standby) 4 W (AC 100 V) – 5 W (AC 240 V)*1
Heat dissipation	1,335 BTU/hour (Lamp Setting “Bright”)/
	1,165 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 100 V
	1,280 BTU/hour (Lamp Setting “Bright”)/
	1,130 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V
Operating temperature	41°F to 95°F (+5°C to +35°C)
Storage temperature	–4°F to 140°F (–20°C to +60°C)
Cabinet	Plastic
I/R carrier frequency	38 kHz
Dimensions (approx.)	12 13/32" ⋅ 4 19/64" ⋅ 11 1/32" (315 (W) ⋅ 109 (H) ⋅ 280 (D) mm) (main body only)
	12 13/32" ⋅ 4 47/64" ⋅ 11 37/64" (315 (W) ⋅ 120 (H) ⋅ 294 (D) mm) (including adjust-
	ment foot and projecting parts)
Weight (approx.)	8.8 lbs. (4.0 kg)
Replacement parts	Remote control, Power cord for U.S. and Canada, etc., Power cord for Europe,
	except U.K., Video cable, DIN-D-sub RS-232C adaptor, Quick Guide, Owner’s
	manual

*1 When STANDBY Mode is set to “Eco”

As a part of policy of continuous improvement, EIKI reserves the right to make design and specification changes for product improvement without prior notice. The performance specifica- tion figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

62

EIP-1600T_EN_m 62 06.1.24, 1:09 PM