Eiki EIP-1600T owner manual Part Names and Functions Continued, Rear View, Terminals

Part Names and Functions (Continued)

Numbers in Z refer to the main pages in this owner’s manual where the topic is explained.

Rear View

			51	Exhaust vent
Intake vent	51		15	Remote control
				sensor (rear)
AC socket	28		13	Kensington
Connect the
supplied Power cord.				Security Standard
				connector
Rear adjustment	31
foot
Terminals
6 5	4	1	2 3	7

Terminal	Description	Page
1	INPUT 1, 2 terminal
	Connecting video equipment with component output terminal (DVD	23
	player, DTV decoder, DVD recorder with hard disc, etc.).
	INPUT 3 terminal	24
2	Connecting video equipment with S-video output terminal (VCR, DVD
	player, etc.).
3	INPUT 4 terminal	24
	Connecting video equipment without S-video output terminal.
	INPUT 5 terminal
4	■ Connecting the computer.	26
	■ Connecting video equipment with component output terminal
	(DVD player, DTV decoder, DVD recorder with hard disc, etc.).
5	INPUT 6 terminal	25
	Connecting video equipment with HDMI output terminal.
6	RS-232C terminal	27
	Connecting the computer to control the projector.
	TRIGGER terminal
7	When the projector is turned on, a control signal (DC 12V) outputs from this	—
	terminal. If an electric screen or other compatible device is connected, it
	can be turned on when the projector is turned on.

12

EIP-1600T_EN_c 12 06.1.24, 1:02 PM