Eiki EIP-1600T Selecting the Type of Correction, “GEOMETRIC ADJUSTMENT” will be displayed

Selecting the Type of Correction

Select the Keystone correction method. Press cKEYSTONE on the remote control.

• “GEOMETRIC ADJUSTMENT” will be displayed.

• Each time cKEYSTONE is pressed, the display toggles as follows:

GEOMETRIC H & V KEYSTONE ADJUSTMENT

The display disappears.

GEOMETRIC	For correcting an image by
ADJUSTMENT	designating the corner of the
	projected image.
	(See page 34.)
H & V	For correcting an image by
KEYSTONE	designating the horizontal or
	vertical axes. (See page 35.)

Note

•When corrections are made with Keystone cor- rection, the changes are saved even if the power cord is unplugged.

•Since Keystone correction digitally corrects the signal, resolution may slightly decrease when it is used. Moiré patterns and line dis- tortions may also be visible in detailed images. However, this is not a malfunction.

•If you cannot correct trapezoidal distortion with Keystone correction, change the placement position of the projector.

•Straight lines and the edges of the displayed image may appear jagged, when adjusting the Keystone setting.

•Also read “About Copyrights” on page 37.

33

EIP-1600T_EN_h 33 06.1.24, 1:05 PM