Eiki EIP-1600T Quick Start, Setup and Projection, Place the projector facing a wall or a screen

_PP. 22–28

Quick Start

This section shows the basic operation (projector connecting with the video equipment). For details, see the page described below for each step.

Setup and Projection

In this section, connection of the projector and the video equipment is explained using one ex- ample.

3	STANDBY-ON	8	STANDBY button
8
	button
5	INPUT buttons	3	ON button
		5	INPUT 4 button
		7	KEYSTONE button
		7	Adjustment buttons
			(P/R/O/Q)
6	Focus ring	7	ENTER button
6 Zoom ring
6 HEIGHT
	ADJUST lever
1. Place the projector facing a wall or a screen		_P. 18

2. Connect the projector to the video equipment and plug the power cord into the AC socket of the projector

To INPUT 4 terminal

	Connect the audio output of
AC socket	any video devices to an
	appropriate audio device.

3. Remove the lens cap and turn the projector on _P. 28

On the	On the remote
projector	control

16

EIP-1600T_EN_e 16 06.1.24, 1:03 PM