BTHS026 UserFunctionMa ual Specification

6.1 Charging the headset

The headset comes with an embedded rechargeable battery. For first time use, it should takes about 4 hours to fully charge the battery. After- ward, it takes about 2 hours to fully charge. With battery fully charged, the talk time is about 6 hours, and the standby time will be about 160 hours.

1.Connect the DC Jack Connector with transferred connector as picture shown below.

2.Connect the other side of transferred connector to the rechargeable port of the headset.

3.Plug the charger into the socket of the power supply.

4.Both red and green LEDs of transferred connector will light up.

Charger

Power

Supply

DC Jack Connector

(Suitable for Nokia Mobilephone)

Red (Green) LED

*Note:

1.When the red indicator of the headset starts to flash, it indicates that the headset is running low on battery. Charge the headset for 2 hours until the red indicator turns off.

2.The headset doesn’t work while charging.

28

Page 12
Image 12
Corega user manual BTHS026 UserFunctionMa ual Specification, Charging the headset