Troubleshooting Guide
4Troubleshooting Guide
Computer networking can sometimes be "tricky" when many components must work together for the ultimate network system to function properly. With the right tools the problems are usually easy to fix. The following tools, available on your computer or the Installation CD, will get you started.
•Setup Tool (from the Corinex CableLAN Installation CD)
•Ping (from the command / terminal prompt, see section 2.6)
If it just doesn’t work...
1.Check that the LEDs on the CableLAN side labelled LINK on all devices are on, if not:
• Check the coaxial and power cables.
30
• Make sure the power outlet is working by plugging something else into it.
• Make sure the coaxial outlet is working and connected to other outlets used for CableLAN. If this fails as well, try 2. – 5.
2. Check the Ethernet cables:
The Corinex CableLAN Adapter has a LED on the Ethernet side labeled LINK. If it is not on:
•Check if the device at the other end of the Ethernet cable is switched on.
•Try a different Ethernet cable.
3.Check the connection between the Corinex CableLAN Adapter and the coax cable network.
