Cortelco 2211 Telephone Features, Tone Dialing, Receiving A Phone Call, Placing A Phone Call

TELEPHONE FEATURES

TONE DIALING

This unit is capable of only DTMF dialing. This phone is not compatible with pulse dialing.

RECEIVING A PHONE CALL

1.Be sure the RINGER switch is set to the HI or LOW position.

2.When the phone rings and the caller’s information shows on the display window (refer to Using the Caller ID Function), lift the handset or press the SPEAKER- PHONE button and begin your conversation.

3.Set the Ringer switch to the OFF position when you do not want to be interrupted by the phone ringing. Remember to set the ringer switch back to Hi or Low when you want to receive calls again.

PLACING A PHONE CALL

1.Lift the handset or press the SPEAKERPHONE button and wait for a dial tone.

2.Dial the telephone number you wish to call. The number will appear on the display window.

SPEAKERPHONEBUTTON

1.Receiving Incoming Calls

a.When the phone rings and the caller’s information shows on the display window (refer to Using the Caller ID Function), press and release the Speakerphone button and talk normally into the built-in microphone from a distance of 5-6 inches.

b.You can adjust the volume of the caller’s voice by sliding the VOLUME CONTROL on the right side of the phone.

c.After the conversation has finished, press the SPEAKERPHONE button to hang up.

2.To Make A Call

a.Press and release the SPEAKERPHONE button.

b.When you hear a dial tone, dial the number or press the auto memory button just as you would on any other push-button telephone. The number will appear on the display window.

7