CALLER ID FEATURES
CALL WAITING DISPLAY
In the past, if you had
Now our Call Waiting Caller ID not only tells you there is another call waiting, but lets you know who the caller is before you answer it. The call waiting information will be shown on the unit’s display.
Press the FLASH button to put the existing call on hold and answer the new call. No matter whether you answer the call or not, the Call Waiting Caller ID will store the call information for future reference.
4/15PM 01:45 Å
CALL #
01
JOHN SMITH
Note: Make sure you have subscribed to both Call Waiting Caller ID and Caller ID service from your local telephone company. If you only have Caller ID service, the unit works for Caller ID only.
MESSAGE WAITING
This unit’s MESSAGE WAITING DETECTION is for FSK, 24 and 90 Volt.
IF YOUR SERVICE IS FSK:
1.If you have a voice mailbox service from the phone company, the MESSAGE light indicator will flash (green) and the message envelope icon will blink in the display when a message waiting signal (on) from the Central Office is received.
2.The MESSAGE light indicator will go off and the message envelope icon will disappear if the message waiting off signal is sent from the Central office.
IF YOUR SERVICE IS 24V OR 90V:
Note: The Message Waiting switch must be in the proper position under the plastic memory insert on the right side of the base.
1.If you receive a voice mail, the red MESSAGE LED will flash (red).
2.After the message is retrieved, the MESSAGE LED will go off.
11